SKU: SLIN-Brown-CX9This site contains affiliate links for which we may be compensated
Consumer Electronics / Surveillance & Smart Home Electronics / Home Surveillance / Sensors & Motion Detectors
Product Features: 1.Reliable & Dependable: Guaranteed 1/3-mile long range (1760 ft; 536m) tested in real-world settings with trees, buildings, walls, and vehicles for an accurate measure of wireless range. Weatherproof motion sensors—works well in rain or snow! 2.Multi-functional Receiver: The included receiver also works as a clock and alarm, customize your chimes, volumes, and more! 3.Reliable & Expandable Sensor: The sensor is equipped with a rechargeable battery for up to 12 months on a full charge! Easily adjust the sensor’s sensitivity to avoid interference like leaves or small animals, or expand your security zone to up to 8 additional sensors! 4.Super Easy To Install And Customize: Install this wireless outdoor motion alert system in just a few minutes! Simply place your sensor(s) (expands up to 8) anywhere on your property, and get a customized in-home chime the second a person, vehicle or large animal moves within 30 feet of your detection zone! For more information, please read the included instructions and Quick Start Guide carefully before use. 5.100% Satisfaction Guaranteed:Please feel free to contact us if you have any questions or concerns about your purchase. Package Included: 1 x Black Receiver 1 x Driveway Alarm Sensor 1 x AC Adapter & Cable 1 x Screwdriver 5 x Screws 5 x Anchors Pls Note:You can choose which color sensor you want. Each sensor package will included 5 x Screws & 5 x Anchors . If you choose 1 Receiver only, then you will only get a receiver. Thank you for your understand. TroubleshootingFalse alarm, but there is nothing in front of the sensor when we check it Cause 1: The sensitivity may be too high, causing little things like leaves or flies to be detected - Disassemble the sensor, and switch the sensitivity to a lower Level Cause 2:The sun is shining directly into the sensor’s eye. The sunlight may be increasing the sensor’s temperature leading to false alarms - Install the sensor in another place that avoids direct sunlight from entering the sensor eye No alarm: people walk in front of the sensor, but the sensor isn’t making noise Cause 1: The sensitivity is too low - Disassemble the sensor, and switch the sensitivity to a higher level Cause 2: The angle of the sensor is not appropriate - Adjust the angle by using the sensor’s ball-joint The battery life of the sensor is short, will power off soon Cause 1: The sensor was installed before being fully charged - After receiving the package, please fully charge the sensor before beginning installation Cause 2: The sensor has been placed in a high-traffic area; it may detect too many movements in a short amount of time - Please install the sensor in an area with lower traffic. Areas with high-traffic where many people are walking are not ideal for placement The sensor can’t work Cause 1: The sensor isn’t connecting with the inside battery - Please check the battery connection inside the sensor Cause 2: The battery of the sensor has run down - Please recharge the sensor by using the included AC adapter Cause 3: The sensor has been turned OFF and has not been turned back on - Press&Hold the POWER button to turn on the sensor
Returns Accepted for this item if it's within 30 Days